03-20-2020
城市二次供热系统安装DN250橡胶软接头
城市二次供热系统安装DN250橡胶软接头
Installation of DN250 rubber soft joint for urban secondary heating system
TEL: 13166299995
二次管网供热管道具有传统地沟和架空敷设管道难以比拟的先进技术、实用性能,而且社会效益和经济效益显着,是供热节能的有力措施。采用直埋供热管道技术,标志着中国供热管道技术发展已经进入了新的起点。随着这项先进技术的进一步完善和发展,供热管道直埋取代地沟和架空势在必行。
按照它的外面保护层材料的不同类能够分为:玻璃钢办法的外护层聚氨酯管、高密度办法的聚乙烯外保护层的、钢办法保护层聚氨酯管和一些其他材料保护层的办法保温管。
城市二次供热系统安装DN250橡胶软接头性能特点:
1、可曲挠单球橡胶接头可大大降低管道系统的震动和噪声,可根本上解决各类管路的接口位移,轴向伸缩及不同心度等问题。
2、根据材料不同可曲挠单球橡胶接头可制成耐酸、耐碱、耐腐蚀、耐油、耐热等各类品种,适应多种介质和环境。
3、可曲挠单球橡胶接头材料属极性橡胶,密封性好,重量轻,安装维修方便、使用寿命长,但避免与锋利金属器械接触,以免刺破球体。
4、如可曲挠单球橡胶接头架空使用可配弹性支架,安装时螺栓要用对角法上紧。
5、如可曲挠单球橡胶接头管路压力过高时,应用极限螺栓将两端法兰连在一起。
城市二次供热系统安装DN250橡胶软接头又称作橡胶软连接、管道减震器、避震喉、软接头等。本产品引进国外先进生产工艺,制作过程中内层受到高压力,锦纶帘子布和胶层得到更好的结合,比普通型可曲挠橡胶接头的工作压力更高,质量更好。它的特点是内胶层混然一体,光洁无缝痕,标签采用硫化工艺,与产品结合在一起。
The heat supply pipeline of the secondary pipe network has the advanced technology and practical performance which is incomparable with the traditional trench and overhead laying pipeline, and has remarkable social and economic benefits, which is a powerful measure for heat supply and energy saving. The application of directly buried heating pipeline technology marks that the development of China''s heating pipeline technology has entered a new starting point. With the further improvement and development of this advanced technology, it is imperative to directly bury the heating pipeline instead of the trench and overhead.
According to the different types of its outer protective layer materials, it can be divided into: the outer protective layer polyurethane pipe of FRP method, the outer protective layer polyethylene of high-density method, the protective layer polyurethane pipe of steel method and the thermal insulation pipe of some other material protective layers.
Performance characteristics of DN250 rubber soft joint installed in urban secondary heating system:
1. The flexible single ball rubber joint can greatly reduce the vibration and noise of the pipeline system, and fundamentally solve the problems of interface displacement, axial expansion and different centrality of various pipelines.
2. According to different materials, flexible single ball rubber joints can be made into acid, alkali, corrosion, oil, heat and other varieties, suitable for a variety of media and environment.
3. Flexible single ball rubber joint material is polar rubber, with good sealing, light weight, convenient installation and maintenance, long service life, but avoid contact with sharp metal instruments, so as to avoid puncturing the ball.
4. If the flexible single ball rubber joint can be used overhead with elastic support, the bolts shall be tightened by diagonal method during installation.
5. If the pressure of flexible single ball rubber joint pipeline is too high, limit bolts shall be used to connect the flanges at both ends.
The installation of DN250 rubber soft joint in urban secondary heating system is also called rubber soft joint, pipeline shock absorber, shock absorber throat, soft joint, etc. This product introduces foreign advanced production technology, the inner layer is under high pressure in the production process, nylon cord fabric and rubber layer get better combination, higher working pressure and better quality than ordinary flexible rubber joint. Its characteristics are that the inner rubber layer is integrated, smooth and seamless, and the label adopts vulcanization process, which is combined with the product.
1 、降低工程造价。
2 、热损耗低,节约能源。
3、防腐,绝缘功用好,运用寿命长。
4、占地少,施工快,有利环境保护。
5 、安全。
城市二次供热系统安装DN250橡胶软接头
Installation of DN250 rubber soft joint for urban secondary heating system
Installation of DN250 rubber soft joint for urban secondary heating system
TEL: 13166299995
二次管网供热管道具有传统地沟和架空敷设管道难以比拟的先进技术、实用性能,而且社会效益和经济效益显着,是供热节能的有力措施。采用直埋供热管道技术,标志着中国供热管道技术发展已经进入了新的起点。随着这项先进技术的进一步完善和发展,供热管道直埋取代地沟和架空势在必行。
按照它的外面保护层材料的不同类能够分为:玻璃钢办法的外护层聚氨酯管、高密度办法的聚乙烯外保护层的、钢办法保护层聚氨酯管和一些其他材料保护层的办法保温管。
城市二次供热系统安装DN250橡胶软接头性能特点:
1、可曲挠单球橡胶接头可大大降低管道系统的震动和噪声,可根本上解决各类管路的接口位移,轴向伸缩及不同心度等问题。
2、根据材料不同可曲挠单球橡胶接头可制成耐酸、耐碱、耐腐蚀、耐油、耐热等各类品种,适应多种介质和环境。
3、可曲挠单球橡胶接头材料属极性橡胶,密封性好,重量轻,安装维修方便、使用寿命长,但避免与锋利金属器械接触,以免刺破球体。
4、如可曲挠单球橡胶接头架空使用可配弹性支架,安装时螺栓要用对角法上紧。
5、如可曲挠单球橡胶接头管路压力过高时,应用极限螺栓将两端法兰连在一起。
城市二次供热系统安装DN250橡胶软接头又称作橡胶软连接、管道减震器、避震喉、软接头等。本产品引进国外先进生产工艺,制作过程中内层受到高压力,锦纶帘子布和胶层得到更好的结合,比普通型可曲挠橡胶接头的工作压力更高,质量更好。它的特点是内胶层混然一体,光洁无缝痕,标签采用硫化工艺,与产品结合在一起。
The heat supply pipeline of the secondary pipe network has the advanced technology and practical performance which is incomparable with the traditional trench and overhead laying pipeline, and has remarkable social and economic benefits, which is a powerful measure for heat supply and energy saving. The application of directly buried heating pipeline technology marks that the development of China''s heating pipeline technology has entered a new starting point. With the further improvement and development of this advanced technology, it is imperative to directly bury the heating pipeline instead of the trench and overhead.
According to the different types of its outer protective layer materials, it can be divided into: the outer protective layer polyurethane pipe of FRP method, the outer protective layer polyethylene of high-density method, the protective layer polyurethane pipe of steel method and the thermal insulation pipe of some other material protective layers.
Performance characteristics of DN250 rubber soft joint installed in urban secondary heating system:
1. The flexible single ball rubber joint can greatly reduce the vibration and noise of the pipeline system, and fundamentally solve the problems of interface displacement, axial expansion and different centrality of various pipelines.
2. According to different materials, flexible single ball rubber joints can be made into acid, alkali, corrosion, oil, heat and other varieties, suitable for a variety of media and environment.
3. Flexible single ball rubber joint material is polar rubber, with good sealing, light weight, convenient installation and maintenance, long service life, but avoid contact with sharp metal instruments, so as to avoid puncturing the ball.
4. If the flexible single ball rubber joint can be used overhead with elastic support, the bolts shall be tightened by diagonal method during installation.
5. If the pressure of flexible single ball rubber joint pipeline is too high, limit bolts shall be used to connect the flanges at both ends.
The installation of DN250 rubber soft joint in urban secondary heating system is also called rubber soft joint, pipeline shock absorber, shock absorber throat, soft joint, etc. This product introduces foreign advanced production technology, the inner layer is under high pressure in the production process, nylon cord fabric and rubber layer get better combination, higher working pressure and better quality than ordinary flexible rubber joint. Its characteristics are that the inner rubber layer is integrated, smooth and seamless, and the label adopts vulcanization process, which is combined with the product.
1 、降低工程造价。
2 、热损耗低,节约能源。
3、防腐,绝缘功用好,运用寿命长。
4、占地少,施工快,有利环境保护。
5 、安全。
城市二次供热系统安装DN250橡胶软接头
Installation of DN250 rubber soft joint for urban secondary heating system
80
